Real 2026 installed pricing for metal roofs in Star, exposed-fastener vs standing seam, and whether metal makes sense for your home.
Installed metal roofing in Star runs $350 to $500 per square for exposed-fastener panels and $650 to $900 for standing seam. For a typical 27-square Star home that totals $9,400 to $24,300, roughly one and a half to two times comparable architectural shingles.
Last updated: August 2026
Exposed-fastener panels ($350-$500/square installed) are the economical way into metal: ribbed panels screwed through the face, decades of life, with fastener gaskets as the eventual maintenance item. Standing seam ($650-$900/square) conceals every fastener under interlocking seams: cleaner lines, longer life, and no gaskets exposed to Idaho sun.
Against asphalt: a typical Star home replaces with GAF Timberline HDZ for $11,100 to $12,700. Metal costs more up front and typically lasts 40-70 years versus 20-30, so the math favors metal the longer you plan to hold the home.
Star's position on the open plain between the Boise River and the foothills leaves it exposed to the west-to-east storm track that produced the June 2026 Canyon County disaster declaration just downstream. Wind is the recurring threat: gusts crease and lift shingles on the broad, unsheltered rooflines of newer subdivisions.
Metal sheds Treasure Valley snow loads cleanly and shrugs off the wind events that crease asphalt shingles. Hail can cosmetically dent panels, but dents rarely leak, which is why many insurers treat metal favorably. Check whether your policy carries a cosmetic-damage exclusion for metal roofs before you buy.
Residential metal in the Treasure Valley centers on six colors: Black, Charcoal, Burnished Slate, Forest Green, Rustic Red, and Galvalume (the bare-metal silver finish). Darker panels read modern and hide dust from the valley's dry summers; Galvalume and lighter tones reflect more summer heat. Our estimate tool previews any of the six on satellite imagery of your actual roof before you commit to anything.
Tear-off to bare decking, deck repairs where needed, high-temperature synthetic underlayment, then panels cut to your roof's measurements - standing seam panels typically arrive site-formed in continuous lengths, eave to ridge, so there are no horizontal seams to leak. Trim, ridge, and flashing details finish the system. Most single-family installs run a few days once materials are on site; complex rooflines run longer.
Star more than tripled in population after 2010, and its housing stock is correspondingly young: large 2010s-2020s single-family homes on generous lots, roofed almost uniformly in architectural asphalt. Most Star roofs have never been replaced - the market there is storm repair, inspection, and the first big replacement wave now approaching for the earliest builds.
Star reroofs are permitted through the City of Star's building program for in-city properties; parcels on the rural edges may fall to Ada or Canyon County depending on which side of the county line they sit. Newer Star subdivisions commonly carry HOA architectural standards on roofing.
Satellite measurement, your choice of panel and color, and a real range in about a minute.
Price My Metal Roof →